| Braeburn 5400 24V/MILLIVOLT SINGLE/MULTI STAGE DUAL POWERED DIGITAL 5/2 OR 7 DAY DAY PROGRAMMABLE / NON-PROGRAMMABLE CONVENTIONAL/HEATPUMP THERMOSTAT WITH KEYPAD LOCKOUT, AUTO CHANGEOVER & HUMIDIFICATION CONTROL UP TO 3H-2C 45-90F
Features
• 7 Day, 5-2 Day Programming or Non-Programmable
• Dual Powered–Hardwired or Battery
• Two Outside Air Modes–Economizer and Time of Day
• Programmable Humidification and Dehumidification
with Fan Speed Control
• Large Display with Bright Blue Backlight
• Simple Menu-Driven Programming
• Separate Installer and User Setup Modes
• Residential or Commercial Program Modes
• Programmable Independent Fan Control with
Recirculation Feature
• Multi-Level Keypad Lockout
• Non-Volatile Memory to Maintain User Settings
• Remote Indoor / Outdoor Sensor Compatible
• Residual Cooling Fan Delay
• Filter, UV and Humidifier Pad Check Monitor
• Adaptive Recovery Mode (ARM™)
• Auxiliary Heat Fossil Fuel Programming Option
• 1st, 2nd and 3rd Stage Adjustable Temperature Differential
• ESD Guard™ Electronic Circuitry
• Compressor Short Cycle Protection
• Compressor Power Outage Protection
• Separate Heating and Cooling Program Set Point Times
and Temperatures
• Temporary Program Override up to 4 Hours or Until Next Set Point
• Programmable Extended Hold Mode
• Programmable AC Monitoring
• Installer Clear Button and Front Access Reset Button
• Heat Pump Fault Detection
• Gas or Electric Fan Control
• Easy Access Front Battery Door
• Meets ENERGY STAR® and California Title 24 Guidelines
Product Specifications
Dimensions: 4.63” x 5.00” x 1.20”
Electric Rating: 24 Volt AC (18-30 Volt AC)
1 amp maximum load per terminal
6 amp total maximum load (all terminals)
AC Power: 18-30 Volt AC
DC Power: 3.0 Volts DC
(2 “AA” Alkaline batteries included)
Compatibility: Single stage or Multi-stage heat / cool systems
including heat pumps with up to three stages
of heating and two stages of cooling
250mv – 750mv millivolt heating systems
Control Range: 45° to 90° F (7° to 32° C)
Display Range: 40° to 99° F (5° to 37° C)
Accuracy: +/- 1° F (+/- .5° C)
Temperature
Differential: 1st Stage - .5°, 1°, or 2° F (.25°, .5°, or 1° C)
2nd and 3rd Stage - 1°, 2°, 3°, 4°, 5°, or 6° F
(.5°, 1°, 1.5°, 2°, 2.5°, or 3° C)
Storage Temperature: 14° to 140° F (-10° to 60° C)
Operating Humidity: 5% to 95% Relative Humidity
Terminations: A/D, H, G, Rc, Rh, W2, B, O, Y1, Y2, W1/E/W3, C,L, S1, S2 | 
